08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance

How can apple washing be automated, residual surface moisture removed, and the product prepared for packaging while minimizing manual operations? For MTB Alliance LLC, KONSORT engineers designed and manufactured an integrated apple washing and drying line with a washing unit capacity of up to 2,000 kg/h.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 4

The solution integrates three consecutive processing stages: gentle fruit washing, surface moisture removal using air knives, and product accumulation before packaging.

During the design process, particular attention was paid to the residence time of apples in the air-blowing zone. To address this, KONSORT engineers incorporated specially designed guide rails and stoppers that temporarily hold the fruit in position, ensuring more thorough removal of residual water from its surface.

Customer Requirements: Automating Apple Washing and Preparation for Packaging

MTB Alliance approached KONSORT with the objective of optimizing the apple preparation process before packaging.

Manual washing and drying involve repetitive operations that require considerable labor time. In addition, residual moisture on the fruit surface can complicate subsequent packaging into paper bags.

The customer therefore required a solution that would:

  • Ensure gentle apple washing without excessive mechanical impact.

  • Provide effective removal of residual surface moisture.

  • Enable visual quality inspection of the product.

  • Reduce the number of manual operations.

  • Establish a continuous processing sequence with apple accumulation before packaging.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 6

KONSORT Solution: Three-Module Apple Washing and Drying Line

To meet these requirements, KONSORT engineers designed and manufactured an integrated equipment system in which each module performs a specific technological function.

Processing sequence:

Bubble Washing Machine → Inspection Conveyor with Air Knives → Rotary Accumulation Table → Packaging

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 8

1. Bubble Washing Machine for Gentle Apple Cleaning

The first processing stage involves washing apples in a bubble washing tank. An air compressor generates intensive streams of air bubbles that agitate the water and help separate contaminants from the fruit surface.

For additional cleaning, the machine is equipped with three rotating brushes. These provide mechanical cleaning of the apples, while a spray nozzle system performs the final rinsing with clean water.

After washing, the product is transported upward by an inclined conveyor equipped with a perforated modular belt. The belt perforations allow excess water to drain, while a KONSORT-manufactured air knife installed at the discharge end provides initial surface moisture removal.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 10

Technical specifications of the washing machine:

  • Processing capacity — up to 2,000 kg/h.

  • Construction material — food-grade AISI 304 stainless steel.

  • Effective belt width — 600 mm.

  • Number of rotating brushes — 3.

  • Discharge conveyor inclination angle — 35°.

  • Perforated food-grade modular conveyor belt.

  • Adjustable conveying speed.

  • Mobile construction with braked castor wheels.

Bubble washing technology is particularly suitable for apples and other fruits that float on the water surface during washing.

More information about the operating principle and available configurations can be found on the KONSORT product page for the Bubble Washing Machine with an Inclined Conveyor and Air Knife.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 12

2. Inspection Conveyor with Air Knives for Apple Surface Drying

After washing, the apples are transferred to an inspection conveyor, where the main stage of surface moisture removal takes place.

The conveyor is equipped with three air knives developed and manufactured by KONSORT. These generate concentrated, directed airflow that removes water droplets from the apple surface.

Unlike thermal drying, this method does not require heating the product, as its primary purpose is to mechanically remove residual water using airflow.

The inspection conveyor also enables operators to visually assess apple quality before packaging.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 14

Conveyor specifications:

  • Length — 2,800 mm.

  • Effective belt width — 1,000 mm.

  • Number of air knives — 3.

  • Dedicated air compressor for each air knife.

  • Habasit modular conveyor belt.

  • Two product flow distributors.

  • Integrated LED lighting for visual inspection.

  • Variable-frequency drive control.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 16

KONSORT Experience: A Similar Solution for the TAVRIA-V Retail Chain

KONSORT previously implemented a similar solution for the TAVRIA-V retail chain. The project involved manufacturing an inspection conveyor with a length of 3,000 mm and an effective belt width of 800 mm, equipped with three air knives and a compressed-air supply system.

After washing, the product enters the conveyor, where visual quality inspection, product selection, and partial surface drying using directed airflow are performed simultaneously.

This project represents another example of KONSORT engineering solutions for automating food product preparation before further processing and packaging.

More information about the equipment: Inspection Conveyor with Air Knives for Partial Surface Moisture Removal.

Engineering Challenge: How to Ensure Sufficient Airflow Exposure Time for Apples?

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 18

One of the key engineering challenges during line development was ensuring sufficient airflow exposure time for effective moisture removal.

If apples pass through the air-knife zone too quickly, the directed airflow may not have enough time to remove the required amount of water from the fruit surface.

To solve this problem, KONSORT engineers integrated specially designed guide rails and stoppers into the inspection conveyor.

Their purpose is to temporarily hold the apples as they pass through the air-blowing zone. This allows the fruit to remain stationary relative to the air knives for a certain period while the directed airflow removes residual surface moisture.

This engineering solution makes it possible to:

  • Increase the duration of airflow exposure on the apple surface.

  • Improve conditions for removing residual water.

  • Synchronize the conveying speed with the surface drying process.

  • Prepare the product for the next stage — packaging into paper bags.

Therefore, the efficiency of surface moisture removal depends not only on the capacity of the air knives but also on the proper control of product movement.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 20

3. Rotary Accumulation Table for Apple Packaging

The final module of the line is a rotary accumulation table with a diameter of 1,200 mm.

It receives apples after surface drying and provides temporary product accumulation in the packaging area. The rotating working surface allows operators to conveniently collect and select apples for subsequent packaging.

To ensure gentle contact with the fruit, the tabletop and the inner surfaces of the sidewalls are lined with a 10 mm thick rubber coating.

The design also includes stainless steel sidewalls, adjustable supports, braked castor wheels, and variable-frequency drive control.

The accumulation table helps maintain a consistent product supply to the packaging area without requiring the entire line to stop during short-term product accumulation.

Technical Specifications of the Apple Washing and Drying Line

Parameter Specification
Customer MTB Alliance LLC
Product Apples
Design capacity of washing machine Up to 2,000 kg/h
Number of main modules 3
Cleaning method Bubble washing, 3 rotating brushes, final rinsing
Surface drying method Directed airflow
Total number of air knives 4: one after the washing machine and three on the inspection conveyor
Washing machine belt width 600 mm
Inspection conveyor belt width 1,000 mm
Inspection conveyor length 2,800 mm
Accumulation table diameter 1,200 mm
Electrical supply 380 V

The actual throughput of the complete processing line also depends on drying time, inspection operations, and product feeding arrangements.

How Many Labor Hours Can Automated Apple Washing Save?

One of the main advantages of automation is the reduction of manual operations associated with washing and surface moisture removal.

For an illustrative calculation, consider processing 2,000 kg of apples and compare manual processing with an automated line.

Assume the following hypothetical parameters: one worker manually washes 200 kg of apples per hour and processes the same quantity during manual drying. Two operators are assigned to operate the automated line.

Operation Manual Processing KONSORT Equipment
Washing 2,000 kg of apples 10 labor-hours Automated
Drying 2,000 kg of apples 10 labor-hours Automated
Line operator labor — 2 labor-hours
Total labor requirements 20 labor-hours 2 labor-hours

Under these assumptions, the calculated labor savings amount to 18 labor-hours per 2 tonnes of apples, equivalent to a 90% reduction in labor requirements for the operations considered.

During an eight-hour shift, assuming continuous operation at nominal capacity, the potential savings could reach approximately 144 labor-hours when processing 16 tonnes of apples.

What Benefits Does the Customer Gain?

Implementing an integrated apple washing and drying line enables a coordinated processing sequence for preparing fruit for packaging.

Key advantages of the solution:

  • Reduced manual labor. The equipment automatically performs the main washing and moisture removal operations.

  • Gentle cleaning. Bubble washing is combined with rotating brushes and final rinsing.

  • Improved surface drying. Three air knives and additional guide rails and stoppers provide the required airflow exposure conditions.

  • Quality control. The inspection section enables visual product assessment before packaging.

  • Efficient packaging operations. The rotary table provides a buffer accumulation area for processed fruit.

  • Integrated processing workflow. All three modules are designed to operate sequentially as one system.

Where Are Fruit Washing and Drying Lines Used?

Such equipment is suitable for fruit-growing enterprises, fruit packing facilities, agricultural processing plants, wholesale distribution centers, and businesses preparing fresh fruit for sale.

Depending on product characteristics and processing requirements, the equipment can be adapted for other types of fruit and vegetables requiring washing, inspection, and surface moisture removal.

Why Do Companies Choose Custom-Engineered KONSORT Solutions?

Every production process has its own requirements regarding throughput, equipment dimensions, conveying methods, and raw material handling.

For this reason, KONSORT develops processing lines tailored to the specific requirements of each customer.

The completed project for MTB Alliance demonstrates how the integration of bubble washing technology, a specially engineered air-knife drying system, and accumulation equipment enables efficient and comprehensive apple preparation before packaging.

08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 22

Order an Apple Washing and Drying Line Directly from the Manufacturer

Looking to automate the washing, cleaning, or surface drying of fruit and vegetables at your production facility?

KONSORT designs and manufactures equipment tailored to individual production requirements — from standalone bubble washing machines and inspection conveyors to complete integrated processing lines.

Explore other food processing equipment solutions at konsort.com.ua or contact our specialists for assistance in selecting the appropriate equipment.

Phone: +38 (067) 116-50-25.

Frequently Asked Questions (FAQ)

What is the processing capacity of the KONSORT apple washing line?

The MTB Alliance project includes a bubble washing machine with a processing capacity of up to 2,000 kg/h. The throughput of the other modules depends on conveying, surface drying, and inspection operating conditions.

How does a bubble washing machine for apples work?

Air bubbles generate water movement, helping remove contaminants from the fruit surface. Three rotating brushes provide additional mechanical cleaning, after which the apples are rinsed with clean water.

What is the purpose of air knives on the conveyor?

Air knives produce a concentrated, directed airflow that removes residual water from the apple surface after washing. This prepares the fruit for subsequent processing operations without the use of thermal drying.

Why is it important to control apple conveying speed during drying?

The shorter the airflow exposure time, the more difficult it becomes to achieve the required level of moisture removal. Therefore, the conveying speed must be coordinated with the air-blowing system capacity, ensuring sufficient residence time in the air-knife zone.

Can the bubble washing machine and drying conveyor be ordered separately?

Yes. KONSORT manufactures both complete processing lines and standalone equipment units customized to meet the technological requirements of each production facility.

Similar projects

  • Конвеєри для харчової промисловості в Україні
  • Лінія для транспортування хлібу
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
  • Конвеєри для харчової промисловості в Україні
  • Лінія для транспортування хлібу
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
  • Конвеєри для харчової промисловості в Україні
  • Лінія для транспортування хлібу
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
  • Конвеєри в агросекторі: як автоматизація змінює сільське господарство
Our solutions are already implemented
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 24
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 26
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 27
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 29
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 31
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 33
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 35
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 36
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 38
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 40
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 42
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 44
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 45
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 47
  • 08. Apple Washing and Drying Line with a Capacity of up to 2,000 kg/h: KONSORT Case Study for MTB Alliance — фото 49

Trusted by

  • Нова Пошта — клієнт KONSORT
  • Sandora — клієнт KONSORT
  • STIHL — клієнт KONSORT
  • Corteva — клієнт KONSORT
  • Овочиста — клієнт KONSORT
  • Вторресурси Схід — клієнт KONSORT

Do you have any questions? Get a free expert consultation